SLIM SSR WITH INTEGRATED HEAT SINK
Product Overview
-
DSRH1 Slim Solid State Relay (SSR), are compact relays designed for applications where space inside control panels is limited.
-
They offer the same function as standard SSRs (switching AC or DC loads using semiconductor components) but come in a thinner housing (typically 6–12 mm width) compared to standard block-type SSRs (usually 20–45 mm width).
🔹 Key Features of Slim SSRs:
-
Narrow, DIN-rail mountable design (space-saving).
-
Typically handle 10A to 80A load currents.
-
Input control voltage options: 3–32 VDC or AC versions.
-
Output options: 24–480 VAC or 24–60 VDC depending on model.
-
Used in industrial automation, HVAC, lighting, and compact control pan
SLIM SSR WITH INTEGRATED HEAT SINK
Technical Details
DC Control DC 10A to 80A Single Phase Slim SSR Solid State Relay With Heat Sink Industrial Relay DIN Rail Mount
STEP 1: Choose a correct type for current
For Resistive load: Current of SSR =2 x working current of load
For Inductive load:Current of SSR =6 x working current of load
For Capacitive load: Current of SSR =10 x working current of load
STEP 2: Choose a suitable heat sink.
When SSR working, it will give out a lot of heat, so in order to extend the life of your SSR, please install a
heat sink , also if the current is over 60A,the cooling fan also required.
heat sink , also if the current is over 60A,the cooling fan also required.
And don’t forget apply heat-conductive silicon greasebetween SSR and heat sink.
Attention:
1. Use fast fuse to protect SSR from load short circuit.
2. The temperature of heatsink atuse must below 80°C.
3. It is better to use varistor for inductive load..
Features
1.Built in TVS to protect triac.
2.With LED indicator.
3.Zero-cross turn on.
|
Model
|
DSRH1-” A-DA/AA/DD
|
|
Control
|
DC to DC
|
|
Load Current
|
10A 25A 40A 50A 60A 80A
|
|
Operation Temperature
|
-30℃ to 80℃
|
|
Certificates
|
CE
|
